ACTECmax AC Oil and Dye Injector with R-134a Snap Quick Coupler 1/4″ SAE Hand Turn

Instruction:
1. Rotate the inside cylinder clockwise to the top
2. Unscrew the cover on the top of the smaller cylinder
3. Pour the liquid (Refrigeration Oil / Fluorescent Dye / Leak
Detection Dye) into the cylinder
4. Tighten the cover
5. If the cylinder is not full filled with oil, then discharge the air
is needed. (Rotate the bigger cylinder counterclockwise until
the oil flows out at the end of the hose.)
6. Turn on the car air conditioner to the maximum air volume
7. Attach the low pressure quick connector to the cylinder
8. Locate the low pressure filler port of the car air conditioner
and connect the other end of the quick connector.
9. Rotate the cylinder counterclockwise to inject the oil into the
air conditioning system

Product Parameters:
Thread Size: 1/4″ SAE
Material: aluminum alloy cylinder, rubber tube, pure copper
connector
Hose pressure: 600-3000PSI
Capacity: 60ml / 2 oz

Package Includes:
1X Oil Injector